How to Print a 2x2 Passport Photo at Home: Step-by-Step on Mac, Windows and PDF
Print a 2x2 U.S. passport photo using Preview, Word or PDF: exact picture dimensions, safe layouts, actual-size settings and ruler checks on the final print.

Quick answer: Yes, you can print your own photo for a U.S. paper passport application. Prepare an acceptable original portrait, place it at exactly 2×2 inches, print in colour on matte or glossy photo-quality paper, disable automatic scaling and measure the finished print. 2 inches equals 50.8 mm or 5.08 cm. A print that looks square on screen can still be the wrong physical size.
This guide covers software and printer controls. For background explanations, use the printing requirements guide; for layout geometry, use the 4×6 sheet guide.
Instructions checked against the official sources below on November 11, 2026. Menu labels vary by application version and printer driver. This is a source-checked workflow, not a test report for every printer.
Before you start
- A suitable original photo. Printing cannot correct shadows, pose or an unsuitable background. Preserve the original and do not retouch appearance or replace the background digitally. Prepare the permitted print crop separately.
- Enough actual detail. A 600×600-pixel square placed at 2×2 inches gives 300 pixels per inch. This is a practical print reference, not a universal government upload minimum. Do not enlarge a blurry file merely to reach 600 pixels.
- Compatible photo-quality paper. Matte or glossy is accepted for U.S. paper passport photos. Ordinary office paper is for a scale test, not the final submission.
- A photo-capable printer, ruler and paper trimmer. Follow the printer manufacturer's paper compatibility instructions. A trimmer is convenient; careful straight cuts matter more than the cutting tool's brand.
First check the image against the State Department photo requirements. Its printed-photo size and quality requirements are separate from the online-renewal workflow.
Step 1: Set the photo's physical size
Option A: macOS Preview, for one prepared square image
- Open the already prepared square portrait in Preview and work on a duplicate, preserving the original.
- Choose Tools > Adjust Size. Keep proportional scaling enabled.
- To change the intended print size while retaining existing pixels, turn Resample image off. Choose inches and set the width to 2; a square image should also show a height of 2.
- Let the resolution reflect the existing pixels. A 600-pixel width at 2 inches is 300 PPI; a 1200-pixel width at 2 inches is 600 PPI. Do not try to force both 300 PPI and 2 inches without understanding whether resampling is changing the pixels.
- Save the working copy and verify the size again before printing.
If the source is rectangular, resizing is not the same as a correct square crop. Prepare the crop first without stretching the face. Apple's Preview resizing guide explains resampling and proportional scaling.
Option B: Microsoft Word on Windows or Mac, for a page layout
- Open desktop Word and choose a page size matching the paper you will load. Letter or A4 photo paper offers generous room for several 2-inch pictures. For 4×6-inch paper, select that exact page size if your driver supports it; otherwise use the appropriate custom-size or page-setup controls.
- Choose Insert > Pictures and add the prepared portrait.
- Select it and open Picture Format > Size, or the picture's advanced Size controls. Lock the aspect ratio and set width and height to 2 inches.
- If you need to position the image freely, choose a suitable text-wrapping option, such as In Front of Text. Keep the image inside the printable area shown for your printer.
- Duplicate as needed, leaving space between pictures and away from the page edges. Recheck dimensions after arranging them.
Microsoft documents exact picture-height and width controls. The setting fixes the object's physical size on the page; it does not prove the portrait itself meets passport rules.
A layout correction: four photos are not automatically safe on 4×6 paper
Two 2-inch photos side by side already occupy the full 4-inch width, leaving no horizontal margins or cutting gap. A 2×2 grid of four photos is therefore not a safe general recommendation for a printer with non-printable edges. Six photos in a 2×3 grid also consume the entire 4×6 sheet.
A less crowded example is two photos in one vertical column on a portrait 4×6 sheet: each 2 inches square, centred horizontally, with top positions at 0.75 and 3.25 inches. This leaves 1-inch side margins, 0.75-inch top and bottom margins and a 0.5-inch gap. Confirm your own printer can reach that area. If it cannot, use a larger sheet rather than shrinking the portraits.
Option C: a ready-made PDF or image sheet
Check the sheet's intended page dimensions and each portrait's placed size before printing. A PDF with a defined physical page is easier to inspect than an image with uncertain resolution metadata. For an image sheet, establish its correct physical size in the software first; “100%” cannot rescue a file whose print dimensions were never defined.
Do not print a single portrait using a full-page “fill” command.
Step 2: Check the print dialog and driver
Open File > Print, or use Ctrl+P on Windows and Command+P on Mac.
| Setting | What to select or verify |
|---|---|
| Printer | The intended photo-capable device |
| Paper size | Match the exact physical sheet and document page |
| Scaling | 100%, Actual Size or No Scaling, as available |
| Automatic fitting | Disable Fit to Page, Scale to Fit, Fill and shrink-to-printable-area options that change the layout |
| Paper type | The manufacturer's setting for the loaded photo paper |
| Quality | A suitable photo-quality setting; inspect the output rather than relying on its label |
| Colour | Colour, with filters and automatic beauty/image enhancement disabled |
| Borderless | Off for a layout designed with margins; if used, inspect expansion/cropping controls |
4×6 inches is 101.6×152.4 mm. A true 10×15 cm sheet is 100×150 mm. Shops and drivers sometimes use these labels loosely. Do not treat them as mathematically identical. Match the actual sheet and keep each portrait at 2×2 inches.
In Preview, select a numeric scale instead of Scale to Fit. In Word, inspect paper-size scaling where offered; driver controls differ. In Acrobat/Reader, use Page Sizing & Handling > Size > Actual Size where available. Inspect printer Properties/Preferences for a second fit or borderless expansion setting.
See Apple's Preview printing instructions and Adobe's page-size guidance. Actual Size preserves a correctly prepared layout; it may clip content outside the printable area instead of shrinking it.
Step 3: Make a scale test
Use plain paper of the same physical size as the prepared document when your printer supports it. A Letter/A4 layout is convenient for this. Do not load a different sheet while leaving a 4×6 setting selected and assume the result proves the final size.
- Print the prepared layout without automatic fitting.
- Measure one portrait: both sides should be 2 inches / 50.8 mm / 5.08 cm.
- Measure the head from the bottom of the chin to the top of the head, not the tallest hair: the official range is 1–1⅜ inches, with a rounded metric reference of 25–35 mm.
- If the size is wrong, check document dimensions, picture-object size, application scaling and driver scaling separately.
When you switch to photo paper, use its proper media setting. That can change driver behaviour, so a plain-paper test does not replace measuring the final photo-paper print. If matching plain test paper is unavailable, inspect a final-media test rather than trusting a different-paper trial.
Step 4: Print on photo paper
Load compatible paper in the correct orientation and select its intended media setting. Print one sheet first. Allow it to dry according to the paper or ink manufacturer's instructions, without touching the image surface. Inspect the real print for colour, sharpness, streaks and smudges.
Step 5: Cut and measure again
Cut cleanly to the intended outer boundary. If the portrait itself is not 2 inches square, trimming the surrounding sheet alone will not fix it. Do not cut into the face or change the required head framing to compensate for a scale error.
Measure the finished copy again, handle it by its edges and keep it flat. Follow the application instructions when attaching the photo.
Troubleshooting a home print
| Problem | Check | Corrective action |
|---|---|---|
| Wrong outer size | Layout and print scaling | Restore exact picture dimensions and disable fitting; retest |
| Head too large despite a correct square | Portrait crop | Prepare a correct crop from the original, not a new page scale |
| Blur or visible printer dots | Original detail, media and quality | Use a sharp original and compatible photo printing; upscaling cannot restore detail |
| Yellow/grey cast | Original image, lighting, ink and paper settings | Compare the original first; diagnose printer/media if the cast appears only in print |
| Banding or streaks | Printer condition | Follow the manufacturer's nozzle-check or maintenance procedure |
| Smearing | Compatibility and drying | Use the right media settings and allow the specified drying time |
| Cropped edge | Printable area or borderless expansion | Move the picture into a supported area or use larger paper; preserve 2-inch size |
Final submission check
Confirm a colour photo-quality print, exactly 2×2 inches, correct head size, recent original capture and no filters or prohibited changes. Reject a damaged, blurry, streaked or poorly reproduced print. A paper test copy is not the submission photo.
PhotoOmni's U.S. photo preparation can help prepare the selected document output, but a private service does not guarantee acceptance or make prohibited editing acceptable. You still need to check the actual print.
FAQ
Can you print your own passport photo? Yes, for a U.S. paper application if the photo and print meet the official requirements. This does not establish another country's rules.
Is 600×600 pixels mandatory? It is a convenient 300-PPI reference for a 2-inch print, not a universal passport-upload rule. Real detail and correct physical size matter.
Can I print on ordinary office paper? Use photo-quality matte or glossy paper for the final submission. Plain paper can be used to test scale.
Can I fit four copies on 4×6 paper with margins? Not in the proposed 2×2 grid: its two columns already fill the entire width. Use a less crowded layout or a larger sheet.
Does 100% guarantee correct size? No. The layout must already place each portrait at 2 inches, and neither the application nor driver may alter it. Measure the final print.
How many copies do I need? The U.S. paper-photo instructions ask for one photo. Extra prints can be useful if one is damaged; they are not an additional application requirement.
Can I scan a print for online renewal? No. The online-renewal instructions require an original digital image and prohibit scanning or photographing a paper photo for upload. Keep the original file.
Sources and method
- State Department: paper passport photos and examples
- State Department: online-renewal photo upload
- 22 CFR 51.26: Photographs
- Apple: Preview resizing
- Apple: printing PDFs and images
- Microsoft: exact picture dimensions in Word
- Adobe: PDF page-size settings
The cover is an AI-generated editorial illustration with a fictional person and illustrative interface, not a software screenshot or an official accepted-photo example.
About the Author
Emma Richardson is PhotoOmni’s Senior ICAO Photo Compliance Expert. With over 12 years of experience, she has helped applicants obtain more than 820,000 passport and visa photo approvals across over 100 countries and territories. She specializes in global passport photo requirements and ICAO-compliant photo verification.